Noise & Vibration; Declaration Of Conformity; Warranty - Pattfield Ergo Tools PE-250NTS Traduction De La Notice Originale

Noise & Vibration
The declared noise emission value has been
measured in accordance with a standard test
method (EN 62841) and may be used for com-
paring one tool with another. The declared
noise emission value may also be used in a
preliminary assessment of exposure.
Warning! The noise emission during
actual use of the power tool can dif-
fer from the declared total value depending
on the ways in which the tool is used, in
particular, what kind of work piece is ma-
chined.
Warning! It is necessary to identify
safety measures to protect the op-
erator that are based on an estimation of
exposure in the actual conditions of use
(taking account of all parts of the operating
cycle such as the times when the tool is
switched off and when it is running idle in
addition to the trigger time).
Try to minimize the impact of vibration and
noise. Exemplary measures to reduce vibra-
tion exposure include wearing gloves while
using the tool, limiting working time, and using
accessories in good condition.
142 EN

Declaration of conformity

We declare, that the product
described in Technical Data:
Wet/Dry Bench Grinder PE-250NTS
manufactured for:
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany
is in conformity with the following directives:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
and in accordance to the following applicable
harmonized standards:
EN 62841-1:2015
EN 62841-3-4:2016/A12:2020
EN 55014-1:2006+A2
EN 55014-2:1997+A2
EN 61000-3-2:2014
EN 61000-3-3:2013
Andreas Back
Head of Quality Management, environment
& CSR
Person authorised to compile the technical
file
Bornheim, 04.11.2020
HORNBACH Baumarkt AG
Hornbachstraße 11
76879 Bornheim / Germany

Warranty

This Pattfield item has been produced accord-
ing to state-of-the-art production methods
and is subject to ongoing strict quality control.
HORNBACH Baumarkt AG, Hornbachstrasse
11, 76879 Bornheim, Germany, guarantees
the quality of the machines according to the
following terms and conditions.
1. Warranty Period
The warranty period is 3 years. The warranty
period starts on the date of purchase. Please
retain the original receipt or invoice in order
to be able to furnish evidence of the date of
purchase.
2. Warranty Scope
The warranty applies exclusively to production
or material defects. The warranty applies only
in the case of private use of the item.
The warranty does not apply to defects result-
ing from
• misuse or improper use,
• use of force or external influences,
• damage due to failure to observe the instal-
lation instructions or instructions for use,
• connecting to an incorrect grid voltage or
current type,
• unprofessional installation,
• overloading the device,
• use of non-approved attachments or acces-
sories,
• failure to observe the maintenance and
safety instructions,
• entry of foreign matter into the device,
• wear and tear due to normal use or
• commercial use.
Furthermore, the warranty does not cover
damage to parts subject to wear and tear,
which is caused by normal wear and tear. The
warranty does not comprise any collateral or
consequential damage or possible installation
and dismantling costs in the event of a war-
ranty incident.
3. Warranty Services
During the warranty period, the warrantor will
inspect the defective item in order to deter-
mine whether a warranty incident is on hand.
If a warranty incident is on hand, the warran-
tor will repair or replace the item at his own
expense. If the item is no longer available at
the time of the warranty incident, the warran-
tor may replace the item with a similar prod-
uct. The replaced item or part shall become
property of the warrantor.
Warranty services (repair or replacement) do
not extend the warranty period. Warranty ser-
vices do not result in any new warranty.
4. Warranty Claims
For warranty claims, please contact the near-
est HORNBACH DIY store.
You can find it at www.hornbach.com.
Warranty claims will only be accepted if the
original receipt or invoice is produced.
5. Statutory Rights
The warranty does not restrict your statutory
rights regarding warranty and product liability.
EN 143