elem Garden Technic DCBT33D Manuel D'utilisation page 60

7.OPERATION
CUTTING OPERATION
METAL BLADE USAGE
Always cut by guiding the head from your right to left.
A metal blade cut best up to the point 1/3 from the edge. Use that area for cutting
shrubs, tough and thick weeds. For cutting young grass, you can use up to
2/3from the tip of blade.
IMPORTANT
Operating at low speed makes it easier for grass,weeds,or twigs to become
caught up in the blades, and also it makes the shaft and clutch wear down more
quickly.
WARNING
·For safety reasons,do not use metalreinforced line.
·Do not cool the blade with water in case of using grinder.It may cause cracks on
blade.
15