elem Garden Technic DCBT33D Manuel D'utilisation page 54

NOTES ON STARTING THE ENGINE
1.Take a careful look around to make sure that no obstacles exist within a
perimeter of 15m or less around brush cutter.
2.Place the body of the brush cutter onto the ground in a flat clear area and hold
it filmly,in place so as to ensure that neither the cutter parts nor the throttle come
into contact with any obstacles when the engine starts up.
3.Place the throttle into the idling position when starting the engine.
KICKBACK SAFETY PRECAUTIONS
1.Before beginning work, clear your working area and remove grasses around
the obstacles.
2.When using your brush cutter, do not grip other parts except the handles.
3.When using your brush cutter, never take your eyes off. if you need to, place
the throttle into the idling position.
4.When using your brush cutter, do not let the unit get closer to your feet nor
raise the unit above your waist.
NOTES ON TRANSPORTATION
(a). Make sure the appropriate blade cover is in place.(if blade is equipped)
OPERATION SAFETY PRECAUTIONS
(a).Grip the handles of the brush cutter firmly with both hands. If you suspend
the work, place the throttle into the idling position.
(b).Always be sure to maintain a steady,even posture while working.
(c). Maintain the speed of the engine at the level required to perform cutting
work., and never raise the speed of the engine above the level necessary.
d. Never touch the spark plug or plug cord while the engine is in operation.
Doing so may result in being subjected to an electrical shock.
e. Never touch the muffler, spark plug, or other metallic parts of the engine while
the engine is in operation or immediately after shutting down the engine. Doing
so may result in serious burns.
9