IMPORTANT
·Never use oil for 4 cycle engine use or water
cooled 2-cycle engine. It can cause spark plug
fouling, exhaust port blocking, or piston ring
sticking.
·Mixed fuels which haue been left unused for a
period of one month or more may clog the
carburetor or result in the engine failing to
operate properly. Put remained fuel into an
air-tight container and keep it in the dark and
cool room.
·Mix
a
regular
unleaded, alcohol-free) and a quality proven
motor oil for air cooled 2 cycle engines.
RECOMMENDED MIXING RATIO
Gasoline 25 :Oil 1
7.OPERATION
STARTING THE ENGINE
WARNING
·Before starting the engine, inspect the engine unit for loose fittings or fuel leaks,
and the cutting attachment is properly installed and securely fastened.
·Keep the cutting head clear of everything around it.
1. Move the choke lever to the closed position.
(1)Choke lever
2. While holding the unit firmly, pull out the starter rope quickly,
3. After the engine has started, open the choke gradually.
4. Allow the engine to run for 2 to 3 minutes to warm up.
grade
gasoline(leaded
(2) Close
(3) Open
or
13