CST/BERGER LASERMARK 58-ILMXT Manuel D'instructions page 10

CALIBRATION
This unit is factory calibrated and should never need calibration. But if it needs to be calibrated, it
must be done by a factory authorized service center. Contact customer service at (815) 432-9200.
SPECIFICATIONS
LEVELING ACCURACY:
LINE LENGTH:
WORKING RANGE:
FAN ANGLE:
LASER DIODES:
LASER CLASS:
POWER:
ESTIMATED BATTERY LIFE:
COMPENSATOR TYPE:
SELF-LEVELING RANGE:
SELF-LEVELING SPEED:
OUT-OF-LEVEL SENSOR:
FEATURE:
OPERATING TEMPERATURE:
WEIGHT (WITH MOUNT):
WALL/TRIPOD MOUNT:
WARRANTY:
APPLICATIONS (Fig. 6)
• Floor and wall tiles
• Wallpaper, stencil work
• Finish carpentry
• Wall fixtures: outlets, switches, lighting
• Door and window frames
• Drop ceilings
• Remodeling projects
• Machinery
10 • ILMXT
±3/32-in at 30-ft feet (2.5mm at 9m)
60-ft @ 30 feet (18m at 9m)
up to 100-ft (30 m) dependent on
illumination of area
>130°
635nm
2M
3 "AA" batteries 1.5Vdc (Alkaline, NiCAD or NiMH)
+25 hrs using alkaline batteries. Operating time will be
reduced when using NiMH or NiCAD batteries.
Gimbal (Ball Bearing hung compensator
magnetically dampened)
±5º
< 2 seconds
Yes
"Manual Mode Feature" allows tilting for
extreme angles
32°F to 104°F (0°C to 40°C)
1.8 lbs. (0.9kg)
1/4- 20 thread
1 year
• Installing closets
• Interior decoration
• Masonry work
• Wall studs, partitions
• Cabinets and shelving
• Wainscoting and paneling
• Wall hangings: artwork,
photos, collectibles
• Pipe and conduit