Recalling A Preset Station; Display Information; Fm Menu; Scan Setting - Albrecht Audio DR 900 Guide D'utilisation

• When you store FM radio station presets, these do not overwrite your DAB station
presets.

7.3 Recalling a Preset Station

• Press the "Preset" button shortly. The display shows "Preset recall", you can
select between all presets by turning the "Tune/Select" button.
• Press "Tune/Select" to choose the preset station which you want to listen to, the
station will begin to play.
• Alternatively press the "1-10" buttons on the Remote control, then the radio will
instantly tune to that station and begin to play.
Note:
If no station has been stored under the preset, the display will change to "Preset
Empty" and then revert to the previously selected station after a few seconds.

7.4 Display Information

When listening to a station you can change the information that will appear on the
second line of the display. To do this, press the "Info/Menu" button repeatedly to move
through the display options.
There are different types of information that are sent by the broadcaster as below:
Radio Text – this is scrolling text information supplied by the broadcaster, information
could be the name of an artist or music title, DJ's name, contact details for the radio
station etc.
Program type (PTY) – such as "Rock", "Pop", "Talk" or "News".
Frequency – here the currently selected frequency is displayed.
Signal Information – shows if the station received in stereo or mono.
Time – supplied by the broadcaster.
Date – supplied by the broadcaster.

7.5 FM Menu

Scan setting

System

Audio
setting
11