Servicing And Maintenance; Checking The Safety Guards; Labelling, Information Signs - Hettich AvanFit YOU 300 Instructions De Service Et De Montage

9. Servicing and maintenance

Maintenance intervals:
Work to be performed
Inspection to VDE 0105, Part 100
Retighten screw connections
Clean oil, grease and dirt off the assembly jig
Visually check tolerance plates for damage
Visually check the pins in the stops for dama-
ge.
Warning
Risk of injury!
Servicing and maintenance work must only be
carried out by instructed, qualified personnel.

9.1 Checking the safety guards

Regularly check safety guards to make sure they are complete
and in proper working order.
• Check the safety guards every day for proper working order.

9.2 Labelling, information signs

Labelling/information signs must be
•
cleaned with a cloth,
•
checked for secure attachment and legibility
•
replaced if they are damaged.
Interval
Quarterly
half yearly
half yearly
half yearly
half yearly
en
27