Troubleshooting - Hettich AvanFit YOU 300 Instructions De Service Et De Montage

8. Troubleshooting

Machine malfunctions must only be rectified by qualified staff
instructed to do so by the person responsible.
When identifying the source of malfunction, attention must be
paid to the entire area surrounding the machine. The manufactu-
rer must be immediately notified of any damage occurring during
the warranty period.
Warning
Safety regulations while identifying the sour-
ce of malfunction and rectifying malfunction!
Observe the accident prevention regulations!
• In the event of a mechanical malfunction,
make sure that the assembly jig is discon-
en
nected from the power supply!
• Prevent the machine from switching back on
again and attach a warning sign!
• Make sure machine is disconnected from the
power supply.
• Earth and short circuit.
• Cover or make inaccessible adjacent live
parts.
• Attach signs warning not to switch the
machine on or operate it (see below).
26
Do not switch on!
Work is in progress!
Date __________
Sign must only
be removed by
________________