Master Forge 0698105 Mode D'emploi page 10

ASSEMBLY INSTRUCTIONS
5. Attach the lifting handles. Insert four M6x12
screws (AA) through the mounting
holes on one of the lifting handles (J) and
into holes on right side of smoker body (I).
Use a Phillips screwdriver to secure the
handles to the smoker body. Repeat on left
side.
Hardware Used
AA
M6x12 Screw
6. Attach the side dampers.
Dampers (K) are installed from the inside of
smoker body (I). Thread the damper handle
through the back hole of the side damper slots.
Align the damper (K) with the mounting holes
and insert four M6x12 screws (BB) from the
outside of the smoker body (I). Secure each
screw with an M6 nut (DD) from the inside of
the smoker body (I). Use a Phillips screwdriver
and wrench to tighten the nuts and bolts. Do not
overtighten. Dampers must be able to slide easily
from side-to-side.
Hardware Used
M6x12
BB
Shoulder Screw
DD M6 Nut
5
x8
6
DD
x8
x8
10
I
K
Lowes.com/masterforge
I
J
AA
BB