Yamaha R-N803 Mode D'emploi page 18

Connections
■
Bi-wire connection
Bi-wire connection separates the woofer from the
combined midrange and tweeter section. A bi-wire
compatible speaker has four binding post terminals. These
two sets of terminals allow the speaker to be split into two
independent sections. With these connections, the mid and
high frequency drivers are connected to one set of terminals
and the low frequency driver to another set of terminals.
This unit
SPEAK
A
B
Connect the other speaker to the other set of terminals in
the same way.
Note
• When making bi-wire connections, remove the shorting bridges
or cables on the speaker. Refer to the speakers' instruction
manuals for more information.
• To use the bi-wire connections, press SPEAKERS A and
SPEAKERS B on the front panel or on the remote control so
that both "A" and "B" indicators light up on the front display.
DIMMER DISPLAY MODE
INPUT BASS
PHONES SPEAKERS USB
A B
5V 1A
YPAO MIC
SPEAKERS A/B
SPEAKERS A/B
A
PHONO
COAX 1 COAX 2
OPT 1
12
En
Speaker
PURE DIRECT
MEMORY CLEAR BAND PRESET TUNING
VOLUME
TREBLE BALANCE LOUDNESS SELECT
PUSH - ENTER
FLAT
-30dB
RETURN
CONNECT
L R
SPEAKERS
B
SLEEP
BLUETOOTH
OPT 2 CD