Sources Of Danger; Risk Of Fire / Flammable Materials Used. Danger Of Burns Or Of Explosion - CASO DESIGN DryAged Master 380 Pro Mode D'emploi

► Defective components must always be replaced with original
replacement parts. Only such parts will guarantee that the
safety requirements are fulfilled.
► The device actively regulates the desired humidity. Do not
use salt blocks for regulation of humidity in the device. The
device could be damaged. If, nevertheless salt blocks are
used, the guarantee of the device expires. The manufacturer
asumes no guarantee for damages of device or meat.

13.3 Sources of danger

13.3.1 Risk of fire / flammable materials used. Danger of
burns or of explosion
DANGER
There is a danger of burns and explosion due to excess
pressure that is created in the event the device is not used
properly.
Observe the following safety notices to avoid dangers
of burns or an an explosion:
Warning: Risk of fire / flammable materials used.
► Do not store explosive substances such as aerosol cans with
a flammable propellant in this device.
► Blowing gas inside the unit is flammable.
► Do not damage the cooling circuit of the device.
► Do not use electrical devices inside the device.
► Do not use mechanical devices to accelerate the defrosting
process.
► Never use the device to store or dry flammable materials.
► Never clean appliance parts with flammable fluids. The fumes
can create a fire hazard or explosion.
PLEASE NOTE
35