Connection Of The Main Power Supply Line - Videotec MAXIMUS MBX Manuel D'instructions

Stripping length of conductors: 5mm
(0.19in).
J26-J27 J25
J8
J7
J9
J6
J22-
J23
J1
Fig. 4
12
J11
F1
7.2.2 Connection of the main power
supply line
CAUTION! TNV-1 installation type. The
installation is type TNV-1, do not connect it
to SELV circuits.
Depending on the version, the device can be
provided with different power supply voltages. The
power supply voltage is indicated on the product
identification label. (4.2 Product marking, page 9).
Connect the power supply cables to connector
J1, following the polarity indicated on the screen
printing. Connect the safety ground cable to
J24
connector J1 following the instructions on the screen
printing (7.2.1 Connector board description, page 11).
CONNECTION OF THE POWER SUPPLY LINE
J10
Colour
Power supply 24Vac
Defined by the installer
Defined by the installer
F2
Yellow/Green
Power supply 230Vac
Blue
Brown
Yellow/Green
Power supply 120Vac
Blue
Brown
Yellow/Green
Tab. 4
Terminals
N (Neutral)
L (Phase)
N (Neutral)
L (Phase)
N (Neutral)
L (Phase)
MNVCMBXSW_2222_EN