SEctIoN 1
1.5
optional Accessories:
ultra-Pulse 350 Mig Pulse Pendant control ...............................................................................................................................P/N 36988
Easy-to-use synergic pulse Mig control. Simply select the desired wire type and diameter, set the wire feed speed and begin
welding. Twenty preset combinations include steel, stainless steel, aluminum and silicon bronze.
Note: MIG-4HD is required.
Hc-5 Hand Pendant control 30 ft. (9.1 m) cable .........................................................................................................................P/N 34838
Provides remote control of Weld Process Selection (cv-Mig/cc-Tig/cc-Stick), Output Control (cc-amps/cv-volts), and Arc
Control (arc force-Stick/Inductance-Mig)
EAS-IV Electronic tig Arc Starter and Plumbing Box .............................................................................................................P/N 34839
This high voltage arc starter is designed for DCSP (electrode negative) Tig applications where arc starting without the tungsten
electrode touching the work is required. The EAS-IV is also effective at eliminating problems associated with RF generating
arc starters or high frequency arc starters. The EAS-IV is rated 400 amps at 40% duty cycle and includes selection switch (Arc
Start/Touch Tig), gas solenoid, gas prefl ow timer and gas postflow timer, direct Tig torch connections, water inlet/outlet fit-
tings, quick connector output connections, 4 ft. (1.2m) welding power input cables with male quick connectors, 8 ft. (2.4m)
control cable, carrying handle and remote control plug (14 pin).
Note: Remote contactor control (such as TC-2B, HC-3B or FC-5B/C) is required.
tig torches - 2-piece cable and hose assembly with Twist Lock Cable Connector for direct connection to the power
source.
HW-17V-2-TL, 12.5 ft ................................................................................................................................................................P/N 35857
HW-17V-2-TL, 25 ft ...................................................................................................................................................................P/N 35856
HW-26V-2-TL, 12.5 ft ...............................................................................................................................................................P/N 35858
tig Accessory Kit - for HW-17, 18 or 26 ......................................................................................................... .............................. P/N 999126
Fc-5B EHD Foot control - 30 ft. (9.1 m) cable. ........................................................................................................................... P/N *33841
Fc-5c Foot control - 30 ft. (9.1 m) cable ....................................................................................................... ................. P/N *0558004234
tc-2B torch control - 25 ft. (7.5 m) cable. ................................................................................................................................... P/N *33839
tc-3A torch control - 30 ft. (9.1 m) cable, use with HW-9, 17, 20, 20A & 24. .................................................................. P/N *35783
tc-3A torch control - 30 ft. (9.1 m) cable, use with HW-18 & HW-26R .. .......................................................................... P/N *36680
*Note: FC-5 & TC-2 provide contactor and current control. TC-3 provides contactor control only.
Power Source to Feeder cable, Lug w/ quick-connect 15 ft. (4.5m) ..................................................................................P/N 36254
Work cable Assembly, Clamp w/ quick-connect 15 ft. (4.5m) ...............................................................................................P/N 36253
Stick Electrode Holder Assembly - 300A, 15 ft. (4.5m) ............................................................................................................P/N 21226
Inverter cart (2 cylinder) for use with SVI 450i & 350 mpi ........................................................................................................P/N 31700
10
DEScRIPtIoN