Trouble Shooting; Notes On Hardware - Fujitsu DYNAMO 640 AI Guide D'utilisation

4. Trouble Shooting

4.1 Notes on Hardware

4.2 Trouble Shooting
Although the DynaMO 640AI is designed to be highly reliable, you may
occasionally experience problems. This section describes problems you may
encounter when using your 640AI. If you experience any problems other than
those outlined below, contact your dealer or Fujitsu subsidiary.
· Never disassemble the DynaMO 640AI
under any circumstances.
· Never drop your DynaMO 640AI.
· Never turn your DynaMO 640AI over while
operating.
· Always ensure that the busy indicator light is off
before turning the power off.
· Make sure the power is off before disconnecting
any cables.
· Never force the disk into the drive or insert MO
disk upside down as this may damage the drive.
· Since the floppy disk is about the same size as
your MO disk, be careful to never insert a floppy
disk into the 640AI drive.
· Do not insert foreign objects into the drive.
· Use only ISO-compliant 3.5-inch MO disk.
· Do not use your 640AI in areas with dust, dirt,
extreme temperature, moisture or condensation.
· Completely plug in the power cable during the
drive installation.
· Do not carry DynaMO 640AI with the disk
inserted.
· Do not clean the product with organic solvents
paint thinner or benzine.
· Retain original packaging for future use should
you need to transport the drive.
1.31