For Windows 9X Users; For Windows Nt 4.0 Users - Fujitsu DYNAMO 640 AI Guide D'utilisation

2. Insert the DynaMO CD into your CD-ROM drive.
3. From the Program Manager, select the [File] menu and then select
[Run...].
4. Type "E:\Win31\setup.exe" in the [Command Line] edit box.
5. Click [OK] to execute the installation program.
6. Follow the installation instructions.
7. After the installation is completed, remove the CD-ROM and re-start
your PC.

2.5.2 For Windows 9x users

1. Start Windows 9x.
2. Insert the DynaMO CD into your CD-ROM drive.
3. Select the [Start] menu, and then select [Run...].
4. Type "E:\Win9X\setup.exe".
5. Click [OK] to execute the installation program.
6. Follow the installation instructions.
7. After the installation is completed, remove the CD-ROM and re-start
your PC.

2.5.3 For Windows NT 4.0 users

1. Start Windows NT 4.0.
2. Log on Windows NT 4.0 with the Administrator privilege.
3. Insert the DynaMO CD into your CD-ROM drive.
4. Select the [Start] menu, and then select [Run...].
5. Type "E:\WinNT 4.0\setup.exe".
6. Click [OK] to execute the installation program.
7. Follow the installation instructions.
1.18