For Os/2 Warp 3.0/4.0 Users (English Version Only) - Fujitsu DYNAMO 640 AI Guide D'utilisation

8. After the installation is completed, remove the CD-ROM and re-start
your PC.

2.5.4 For OS/2 WARP 3.0/4.0 users (English version only)

1. Start OS/2.
2. Insert the DynaMO CD into your CD-ROM drive.
3. Open [OS/2 Windows] in the LaunchPad.
4. Type "DDINSTAL" and press the [Enter] key to open [Device Driver
Install].
5. Type "E:\OS2" in the [Source directory] edit box.
6. Type "C:\OS2" in the [Destination directory] edit box.
7. Press [Install...].
8. Select "Fujitsu 3.5" SCSI/ATAPI MO Disk Device Driver (ver 3.0 US)"
and press [OK].
9. Press [Exit] to exit the installer.
10. Re-start your computer.
During the installation, be sure to assign a drive letter
for the DynaMO 640AI drive that appears as M25-
MCC3064AP. NT-Explorer will not automatically
assign a drive letter for the drive. If you do not assign
a drive letter during installation, you must assign a
drive letter using the MO Disk Formatter. See
Section 2.
1.19