Seltron RCD1 Mode D'emploi page 5

ROOM UNIT DISPLAY
DESCRIPTIONS OF SYMBOLS ON SCREEN
Event display symbols
Symbol Description
Warning.
When an error occurs on the heating controller, the room unit
makes two long beeps, and the symbol starts flashing. When
the error is no longer present, the symbol is lighted. When
we read the error in the error list on the controller, the symbol
turns off.
Heating controller safety function turning on notification.
When a protective function occurs on the controller, the room
unit makes a single long beep, and the symbol starts flashing.
When the protective function is no longer present, the symbol
is lighted. When we read the protective function in the notifica-
tion list on the controller, the symbol turns off.
Notification about the heat accumulator.
When accumulator temperature does not meet heating needs,
the room unit makes two short beeps, and the symbol starts
flashing. When accumulator temperature falls below minimum
temperature, the room unit makes three short beeps, and the
symbol lights up.
event display symbols
display of measured and desired tem-
peratures and other information
display of time, day of the week and
state of time programmes
operating mode display
English 5