Seltron RCD1 Mode D'emploi page 14

ONE-TIME DOMESTIC HOT WATER WARMING FUNCTION
(RCD2 ONLY)
Function enables that we can turn one-time d.h.w. heating to the de-
sired temperature at any time. The function is automatically turned off
when domestic hot water is warm or after one hour.
Function can be activated by pressing the button
Now we can change the desired temperature of domestic hot water
by pressing button
flashing. By pressing the button
One-time domestic hot water function can be turned off before expirati-
on by pressing
FIREPLACE FUNCTION (RCD2 ONLY)
The Fireplace function enables temporary shut-down of room tempera-
ture effect on room heating regulation. This function is turned on when
we make a fire in the fireplace in the living room which has the room
unit. This prevents to reduce the temperature levels in other rooms due
to increase of temperature in the living room.
Function can be activated by pressing the
Operation of fireplace function is indicated by the flashing symbol
Fireplace function works at least for the amount of time set with para-
meter S1.13. After expiration of time, it works until the measured room
temperature is higher than the desired room temperature that is set.
14 English
desired d. h. w. temperature
one-time d. h. w. warming function
display
and . Change the setting while the value is
.
again, return to the basic display.
button for 10 seconds.
.
.