Seltron RCD1 Mode D'emploi page 18

DISPLAY ILLUMINATION OPERATION MODE
This setting determines type of operation of display
illumination.
The following settings are available: 0 - no display
illumination.
1- The display has maximum brightness when ente-
P1.4 ring settings to the room unit. After a delay, display
illumination is reduced to the minimum value.
2- Same as 1, but display illumination is adapted to
the amount of light in the room.
3- Same as 2, but room unit display is completely
turned off in standby mode during night temperature
interval if this occurs between 6pm and 6am.
MINIMUM SCREEN ILLUMINATION
P1.5 This setting determines minimum display illumina-
tion.
MAXIMUM SCREEN ILLUMINATION
P1.6 This setting determines maximum display illumina-
tion.
P1.7 DISPLAY CONTRAST
This setting determines display contrast.
SOUND
This setting determines when sound is activated
P1.8
DISPLAYING WARNINGS AND MESSAGES
This setting determines whether warnings and
P1.9
notifications are displayed.
BASIC DISPLAY
This setting determines which information will be
displayed on the basic display.
P1.10
18 English
0 ÷ 3 (2)
0 ÷ 100 % (5)
0 ÷ 100 % (80)
1 ÷ 8 (6)
0 - never
1 - buttons
2 - buttons and warnings
3 - buttons, warnings,
and notifications
0 - no display
1 - warnings
2 - warnings and
notifications
1 - room temp.
2 - auxilliary temp.
3 - d. h. w. temp.
4 - humidity
5 - air pressure
6 - auxiliary sensor
7 - air quality*
11 - T1 controller sensor
...
22 - T12 controller sensor