Seltron RCD1 Mode D'emploi page 16

Move between information and parameters for settings in individual
groups with buttons
Only parameters in groups P1, P2, and S1 can be changed.
By pressing , the setting value starts flashing. Now we can change the
parameter value with button
and . Confirm the set value by pressing the button .
By pressing button
ds, we move one level back in any level of settings.
Information group t1 - temperatures
No. Description
T1 CONTROLLER SENSOR
t1.1
Measured and calculated temperatures for T1 sensor are displayed alternately.
t1.2 T2 CONTROLLER SENSOR
Measured and calculated temperatures for T2 sensor are displayed alternately.
T3 CONTROLLER SENSOR
t1.3
Measured and calculated temperatures for T3 sensor are displayed alternately.
T4 CONTROLLER SENSOR
t1.4
Measured and calculated temperatures for T4 sensor are displayed alternately.
t1.5 T5 CONTROLLER SENSOR
Measured and calculated temperatures for T5 sensor are displayed alternately.
T6 CONTROLLER SENSOR
t1.6
Measured and calculated temperatures for T6 sensor are displayed alternately.
T7 CONTROLLER SENSOR
t1.7
Measured and calculated temperatures for T7 sensor are displayed alternately.
t1.8 T8 CONTROLLER SENSOR
Measured and calculated temperatures for T8 sensor are displayed alternately.
t1.9 T9 CONTROLLER SENSOR
Measured and calculated temperatures for T9 sensor are displayed alternately.
T10 CONTROLLER SENSOR
t1.10
Measured and calculated temperatures for T10 sensor are displayed alternately.
T11 CONTROLLER SENSOR
t1.11
Measured and calculated temperatures for T11 sensor are displayed alternately.
16 English
and .
or by pressing the button for 2 secon-
...