Seltron RCD1 Mode D'emploi page 19

FIRST DISPLAY IN THE INFO LINE
This setting determines which information will be
displayed first in the info line.
P1.11
SECOND DISPLAY IN THE INFO LINE
This setting determines which information will be
P1.12
displayed second in the info line.
THIRD DISPLAY IN THE INFO LINE
This setting determines which information will be
P1.13
displayed third in the info line..
FOURTH DISPLAY IN THE INFO LINE
This setting determines which information will be
P1.14
displayed fourth in the info line.
FIFTH DISPLAY IN THE INFO LINE
This setting determines which information will be
P1.15
displayed fifth in the info line.
SIXTH DISPLAY IN THE INFO LINE
This setting determines which information will be
P1.16
displayed sixth in the info line.
SEVENTH DISPLAY IN THE INFO LINE
This setting determines which information will be
P1.17
displayed seventh in the info line.
NUMBER OF INFORMATION ON BASIC DISPLAY
This setting determines how many information from
P1.18
the info line should be alternatively displayed on the
basic display.
* RCD1 Premium and RCD2 Premium only.
0 - no display
1 - room temp.
2 - auxilliary temp.
3 - d. h. w. temp.
4 - humidity
5 - air pressure
6 - auxiliary sensor (AUX)
7 - air quality*
11 - T1 controller sensor
...
22 - T12 controller sensor
Setting range is identical
to parameter P1.11.
Factory setting is:
3 - d. h. w. temperature
Setting range is identical
to parameter P1.11.
Factory setting is:
4 - humidity
Setting range is identical
to parameter P1.11.
Factory setting is:
5 - air pressure
Setting range is identical
to parameter P1.11.
Factory setting is:
0 - no display
Setting range is identical
to parameter P1.11.
Factory setting is:
0 - no display
Setting range is identical
to parameter P1.11.
Factory setting is:
0 - no display
1 ÷ 9 (1)
English 19