Atag VA2113PT Manuel D'utilisation page 66

Table continued from last page
Problem
30
Possible causes
The dishwasher is not fully
loaded.
Rinse aid needs topping up or
dosage is set too low.
3-in-1/ All-in-one detergent is
used and the setting TAB (3-in-
1/ All-in-one detergent) is activ-
ated.
Action
Fully load the dishwasher.
Top up with rinse add or in-
crease the rinse aid dosage.
See the sections Before wash-
ing for the first time and Set-
tings.
Inactivate the setting TAB (3-in-
1/ All-in-one detergent) and top
up salt and rinse aid.