Settings; Open The Settings Menu; You Can Now Adjust The Following Settings - Atag VA2113PT Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Settings

Open the settings menu:

1
First, open the door. Turn off the machine. Press and hold the main power switch
until the display lights up.
2
Within 10 seconds:
+
- press and hold the Program selector and the SpeedWash option button until
the settings menu opens.
3
The display shows the settings menu (current setting and its currently set value).
(Exit the menu by browsing through the menu or pressing the main power switch.)
Navigate the settings menu:
Press to browse between setting values.

You can now adjust the following settings:

Settings
1
Rinse aid
2
Water hardness
Options
1:00 - 1:05
Rinse aid dosage setting.
Increase the rinse aid dosage:
Decrease the rinse aid dosage:
Pre-selected at factory: 05
2:00 - 2:09
Adjusting the water softener. Select a setting depending
on the hardness of the water supply. It is important that
this setting is correct!
German water
hardness scale
0-5°dH
6-8°dH
9-11°dH
Press to save the set value and continue to the next
setting.
If the dishes have water marks.
If the dishes have a sticky white/blue film.
If the dishes are streaked.
Build-up of foam. If you have very soft water, the
rinse aid can be diluted 50:50 with water.
French water
hardness scale
0-9°fH
10-14°fH
15-20°fH
Current setting.
Current setting value.
Recommended
setting
2:00
2:01
2:02
19

Publicité

Table des Matières
loading

Table des Matières