Unit Description - Lanaform IRT-100 Mode D'emploi

ENGLISH ENGLISH
INTENDED USE · IRT-100
Thank you for purchasing our Infrared Thermometer, type
AET-R1D1. This Infrared Thermometer is a non-sterile,
reusable, handheld device. It can be used by consumers in
homecare environment and doctors in clinic as reference.
It is intended for measuring human body temperature of
three months and above of people by detecting infrared
heat from the center of the forehead.
· The clinical thermometer is an adjusted mode clinical
thermometer.
· The patient can use and maintenance the device as an
operator.
· For safe and proper use of this product, be sure to read
and fully understand Safety Precautions contained in
this user manual.
· Keep this manual with you for a convenient reference.
· Keep this manual in a proper way and avoid any loss.
· If you need other information, please contact the
manufacturer.
The correct measurement
method to follow:
Measure the forehead. Distance 15mm to 50mm.
CORRECT MEASUREMENT METHOD
Turn the thermometer on by pressing the
1
"SCAN" button. A beep sound will be heard
following which the screen will with ---°C
indicating the unit is ready for use.
Place the thermometer probe point near the
2
forehead and press "SCAN" and release after ~
1 second and the thermometer will beep and
display the accurate temperature. Whenever
consecutive readings are required, please wait
for at least 5 second. The above procedure can
be repeated as many times as required.
To turn off the device press and hold the "SCAN"
3
switch for ~ 5 seconds. Or the thermometer will
turn off automatically after ~ 60 seconds.

UNIT DESCRIPTION