Electronic Oven Controls; Important - Whirlpool WOC97ES0ES Mode D'emploi

Control Display
The display will light up when first powered up or after a power
loss. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One beep
■ Valid keypad touch
■ Function has been entered
One chime
■ Preheat cycle has been completed
Three beeps
■ Invalid keypad touch
Three chimes
■ End of a cooking cycle
Four chimes
■ When timer reaches zero
Includes using the Timer for functions other than cooking.
Use the Settings/Clock keypad to change the tone settings.
Settings
Many features of the microwave oven control can be adjusted
to meet your personal needs. These changes are made using
the Settings/Clock keypad.
Use the Settings/Clock keypad to scroll through the features
that can be changed. Each press of the Settings/Clock keypad
will advance the display to the next setting. You can also
press SETTINGS/CLOCK and then press the number keypad
indicated in the following chart to go straight to the desired
setting.
After selecting the feature to be changed, the control will
prompt you for the required input. Press the Setting number
for the selected setting to adjust the setting. Details of
the microwave oven feature changes are explained in the
following sections.
Press CANCEL to exit Settings.
Settings Chart
Setting Number Microwave Only
1 Clock
2 Temp
3 Sound (On/Off)
4 Sound (High/Low)
5 End Tone
6 Turntable
7 Language
8 Demo Mode
9
0

Electronic Oven Controls

Fahrenheit and Celsius
The temperature is preset in Fahrenheit; however it can be
changed to Celsius.
1. Press SETTINGS/CLOCK.
2. Press the number "2" keypad to adjust the setting.
3. Repeat to adjust the setting again.
All Tones
All tones are preset on, but they can be turned off.
1. Press SETTINGS/CLOCK.
2. Press the number "3" keypad to adjust the setting.
3. Repeat to adjust the setting again.
Tone Volume
The volume is preset to low, but it can be changed to high.
1. Press SETTINGS/CLOCK.
2. Press the number "4" keypad to adjust the setting.
3. Repeat to adjust the setting again.
End-of-Cycle and Reminder Tones
The end-of-cycle and reminder tones are preset to On,
but they can be turned off. If all tones have been turned off,
the end-of-cycle and reminder tones cannot be turned on.
1. Press SETTINGS/CLOCK.
2. Press the number "5" keypad to adjust the setting.
3. Repeat to adjust the setting again.
Turntable
The turntable is preset to ON, but it can be turned off in some
cooking modes.
1. Press SETTINGS/CLOCK.
2. Press the number "6" keypad (single microwaves only)
3. Repeat to adjust the setting again.
Combo
Language
Clock
Language options are English and French.
1. Press SETTINGS/CLOCK.
Temp
2. Press the number "7" keypad (single microwaves only)
Sound (On/Off)
Sound (High/Low)
End Tone
3. Repeat to adjust the setting again.
Calibrate
Demo Mode
Sabbath
IMPORTANT: This feature is intended for use on the sales floor
Turntable
with 120V power connection and permits the control features
Language to be demonstrated without the magnetron turning on. If this
feature is activated, the microwave will not work.
Demo Mode
1. Press SETTINGS/CLOCK.
2. Press the number "8" keypad (single microwaves only)
3. Repeat to adjust the setting again.
9
or the number "8" keypad (combination microwave/ovens
only) to adjust the setting.
NOTE: Some cooking modes require the turntable to be on
and this setting will only affect those cooking modes where
it is optional.
or the number "9" keypad (combination microwave/ovens
only) to adjust the setting.
or the number "0" keypad (combination microwave/ovens
only) to adjust the setting.