Oven Use; Electronic Oven Controls - Whirlpool WOC97ES0ES Mode D'emploi

Keypad Feature
PROOF Proofing bread
STOP TIME Delayed start
COOK TIME Timed cooking
SELF CLEAN Self-clean cycle
START hold 3 sec. Oven control
lockout
Odors and smoke are normal when the oven is used the first few
times or when it is heavily soiled.
Control Display
The display will light up when first powered up or after a power
loss. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Beep
Valid keypad press.
■
Function has been entered.
■
One Chime
Oven is preheated.
■
Three Beeps
Invalid keypad press.
■
Three Chimes
End of cycle.
■
Four Chimes
End of Timer.
■
Use the Settings/Clock keypad to change the tone settings.
Instructions
1. Press PROOF for the desired oven.
2. Press START for the selected oven.
Let the dough rise until nearly doubled in size. Proofing time may vary depending
on dough type and quantity.
3. Press CANCEL for the selected oven when finished proofing.
Refer to the "Proofing Bread" section for more information.
The Stop Time keypad is used to enter the stop time for an oven function. Stop Time should
not be used for foods such as breads and cakes because they may not bake properly.
To set a Cook Time or a Stop Time, see the "Cook Time" section.
Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length
of time, and/or shut off automatically.
To set a Cook Time or a Stop Time, see the "Cook Time" section.
See the "Self-Clean Cycle" section.
1. Check that the ovens and timers are off.
2. Press and hold START for 3 seconds.
3. If enabled, a tone will sound, and "Control Locked" will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked.

OVEN USE

Electronic Oven Controls

IMPORTANT: The health of some birds is extremely sensitive
to the fumes given off. Exposure to the fumes may result in
death to certain birds. Always move birds to another closed
and well-ventilated room.
Settings
Many features of the oven control can be adjusted to meet
your personal needs. These changes are made using the
Settings/Clock keypad.
Use the Settings/Clock keypad to scroll through the features
that can be changed. Each press of the Settings/Clock keypad
will advance the display to the next setting. You can also press
SETTINGS/CLOCK, and then press the number keypad indicated
in the following chart to go straight to the desired setting.
Settings Number
1 Clock
2 Temp
3 Sound (On/Off)
4 Sound (High/Low)
5 End Tone
6 Calibrate
7 Sabbath
8 Language
9 Demo Mode
After selecting the feature to be changed, the control will
prompt you for the required input. Press the Settings number
for the selected setting to adjust the setting. Details of all of
the feature changes are explained in the following sections.
Press CANCEL to exit Settings.
Setting
5