Oven Care; Self-Cleaning Cycle - Whirlpool WOC97ES0ES Mode D'emploi

To Set a Cook Time and Stop Time:
NOTE: This function is not available in Convect Bake and Convect
Roast if the Convect Convert Time/Temp feature is used.
1. Press the keypad for any cooking function
2. Press the number keypads to set the desired temperature.
If the temperature entered is not in the range of the
temperatures allowed, the default temperature will be
displayed and audible tones will sound. Enter a temperature
in the allowable range.
3. Press COOK TIME for the selected oven.
WARNING
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during

Self-Cleaning cycle.

Failure to follow these instructions can result in burns.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off during the Self-Cleaning cycle. Exposure to
the fumes may result in death to certain birds. Always move birds
to another closed and well-ventilated room.
Keep the kitchen well-ventilated during the Self-Cleaning cycle
to help get rid of heat, odors and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle.
Air must be able to move freely. Depending on your model,
see "Oven Vent" or "Oven Vents" section.
Do not clean, rub, damage or move the oven door gasket.
Prepare Oven:
Remove the broiler pan, grid, cookware and bakeware,
■
all cooking utensils, oven racks and aluminum foil and,
on some models, the temperature probe from the oven.
Use a damp cloth to clean inside door edge and the
■
1 / " (38 mm) area around the inside oven cavity frame,
1
2
being certain not to move or bend the gasket.
Wipe out any loose soil to reduce smoke and avoid damage.
■
At high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
IMPORTANT:
For double ovens only: Only 1 oven can be cleaned at a time.
■
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in
the oven may result in discoloring, loss of gloss, hairline cracks
and popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning
soil to a powdery ash.
10
4. Press the number keypads to enter the length of time to cook.
5. Press STOP TIME for the selected oven.
6. Press the number keypads to enter the time of day to stop
cooking.
7. Press START.
The start time is automatically calculated. When the
start time is reached, the oven will automatically turn on.
When the stop time is reached, the oven will shut
off automatically.
8. Press CANCEL for the selected oven to clear the display.

OVEN CARE

Self-Cleaning Cycle
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp cloth
to the inner door glass before it has completely cooled.
The oven light will not work during the Self-Cleaning cycle.
To stop the Self-Cleaning cycle at anytime, press CANCEL for
the selected oven. If the temperature is too high, the oven door
will remain locked.
Before self-cleaning, make sure the door is completely closed or
the door will not lock and the Self-Cleaning cycle will not begin.
NOTE: 12 hours must pass before the next Self-Clean can begin,
and for double ovens only: only one oven can use the Self-Clean
cycle at a time
The oven is preset for a 4 hours and 30 minutes clean cycle;
however, the time can be changed. Suggested clean times are
3 hours and 30 minutes for light soil and between 4 hours and
30 minutes and 5 hours and 30 minutes for average to heavy soil.
Use the following chart as a guide to determine the desired
cleaning level.
Cleaning Level
1 (Quick)
2 (Reg)
3 (Maxi)
To Self-Clean:
1. Close the oven door, and then press SELF CLEAN for the
desired oven until the desired clean time is displayed.
2. Press START.
The oven door will automatically lock.
When the Self-Clean cycle is complete and the oven cools,
the oven door will unlock.
3. Press CANCEL for the selected oven.
4. When the oven is completely cooled, remove ash with a
damp cloth.
To Delay Start Self-Clean:
1. Close the oven door, and then press SELF CLEAN for
the desired oven until the desired clean time is displayed.
2. Press STOP TIME.
3. Press the number keypads to enter the stop time.
4. Press START.
The start and stop times are automatically calculated.
The oven door will automatically lock when the start time
is reached.
When the Self-Clean cycle is complete and the oven cools,
the oven door will unlock.
5. Press CANCEL for the selected oven.
6. When the oven is completely cooled, remove ash with a
damp cloth.
Total Cleaning Time
(Includes a 30 Minute Cool Down Time)
3 hours 30 minutes
4 hours 30 minutes
5 hours 30 minutes