Building type
program
Timer schedule Graphically program the Timer in 1 hour time blocks.
5. PARAMETER SETTINGS (default)
Language
Country
Date
Time
Building program
Heating cable type
Pipe diameter
Insulation thickness
Ambient temperature
Maintain temperature
Economy temperature
Low temperature limit
High temperature limit
Low temperature alarm
High temperature alarm
Alarm sound
Key lock
6. TECHNICAL SPECIFICATIONS
6.1. Building program schedule
Apartments
TIME IN HOUR
00
01
12
13
16 | nVent.com
The HWAT-ECO-GF has 7 default timer programs. Select by
tapping on the program of choice (box will turn red).
See figure xx for the schedule of each program.
The building program reflects the tapping profiles.
You can set a block to OFF, Economy temp,
Maintain temp, or HEAT-UP*
OFF
ECONOMY
(*HEAT-UP=100% power, only when using the HWAT-R2
cable. This is the legionella prevention mode and it is not
pre-programmed. Activate this preferably during night
hours to minimize risk of scalding.
Use the modes button to overwrite the timer schedule.
Select a temperature mode to assign to the time bock of
choice.
Weekday & Weekend
APARTMENT WEEKDAY
02
03
04
14
15
16
MAINTAIN
HEAT-UP
English
Not pre-defined; to be selected
01/01/2017 or last saved date
00:00; or last saved time
Not pre-defined; to be selected
Not pre-defined/ to be selected
1" (DN 25)
31.18"
68°F / 20°C
131°F / 55°C
122°F / 50°C
104°F / 40°C
150°F/ 65°C
OFF
ON
ON
OFF
HEAT-UP
07
05
06
17
18
19
09:31
MON
09
08
10
21
20
22
11
23