Albrecht Tectalk Float Mode D'emploi page 27

set the last used channel. When SCAN feature is on, the SC icon will
appear on the LC Display and the Channel number is flashing.
CTCSS tone Scanning
This function allows CTCSS tone scanning on the selected
channel. Select the desired channel number and activate the CTCSS
tone scanning. If you press the PTT or LOCK buttons during the SCAN
operation, SCAN will stop and the radio will return to the last used
channel. When the CTCSS-Scan feature is on, the SC icon will appear
on the LC Display and the CTCSS Code is flashing.
Dual Watch Function
The radio is equipped with a Dual Watch function that allows to
monitor 2 different channels without the CTCSS code.
To set the Dual Watch function, please proceed as follows:
1. Select the first channel to be monitored.
2. Press the MENU button seven times, until the DW icon is
displayed and the selected channel will blink on the LC Display.
3. Press the CH UP or CH DOWN buttons to select the second
channel to be monitored.
4. Now the radio will start monitoring the two channels and will
stop when a signal is received on one of the two stored
channels.
5. To disable the Dual Watch function and return to Stand-by
mode, press the LOCK button.
When the DW feature is on, the DW icon will appear on the LC Display
and the channel number is alternating between the first and the second
selected channel.
Call Tone Setting
The radio is equipped with 5 user selectable Call tone
Melodies. Press the Call button to transmit the Call Tone Melody.
Roger Beep Tone Setting
The radio is equipped with a user selectable Roger Beep Tone feature,
which enables you to send a Beep Tone at the end of each
transmission after every release of the PTT button.
English 27