How To Load Paper; Loading Paper In The Paper Drawer; When You Have Loaded A Different Type Of Paper Than The Preset One - Canon imageRUNNER ADVANCE DX C478iZ Foire Aux Questions

How to Load Paper

Loading Paper in the Paper
Drawer
1
2
Slide the light blue knobs to adjust the positions
of the paper guides.
Align the protrusion to the
appropriate paper size marking.
3
First fan the paper stack well and then load it.
The print side
face up
4
Place the paper drawer back into the machine.
CAUTION!
Be careful not to get your fingers caught
between the paper drawer and the machine.
P O I N T
When you have changed the paper size, replace
the paper size label with an appropriate one, as
P.34
necessary.
When you have loaded a different type of paper
than the preset one, be sure to change the paper
on the right half of this page
type setting.
8
Make sure that this
line is not exceeded.
When You Have Loaded a Different
Type of Paper than the Preset One
1
Press
2
Press [Preferences] [Paper Settings] [Paper
Settings].
3
Select the
paper source.
P O I N T
Any paper source other than
For more information
4
1.
Check the
paper size.
P O I N T
If the displayed paper size is different from the
loaded paper size, adjust the paper guides.
2.
Press [Set].
is optional.
User's Guide