Loading Envelopes - Canon imageRUNNER ADVANCE DX C478iZ Foire Aux Questions

How to Load Paper

Loading Envelopes

CAUTION!
• Envelopes can be loaded in the multi-purpose tray.
• Do not use envelopes that have glue attached to their flaps, as the glue may melt due to the heat and pressure of
the fixing unit.
• Do not print on the reverse side of the envelopes (the side with the glued areas).
• For the multi-purpose tray, load envelopes with the front side face down. For the loading orientation, see the table
below.
No. 10 (COM10)
ISO-C5
DL
Monarch
Preparation before Loading Envelopes
1
Take five or so pieces of envelopes, fan them well
to eliminate curls, and level the stack flat.
12
Press the stack along
the four side edges.
Multi-Purpose Tray
Envelope
Multi-Purpose Tray
2
To prevent the sealing edge of the seal flap from
floating from the body of the envelope, press the
envelope in the four corners and expel the air.