Clamping Correctly - Allmatic NC4 Serie Instructions De Service

8 | Clamping
8.4.2

Clamping Correctly

Fig. 15: Position of workpiece axis
Workpiece correctly clamped
Workpiece clamped off centre.
Risk of damage to the jaws and the workpiece.
Ø Clamp workpiece centrally.
Fig. 16: Positioning of workpiece axis
Workpiece correctly clamped
Workpiece clamped at an angle.
Risk of damage to the jaws and the workpiece.
Ø Only clamp the workpiece when lying flat.
Ø Only clamp workpieces of a suitable size.
58 / 376
Workpiece incorrectly clamped
Workpiece incorrectly clamped
ALLMATIC
NC4