Allmatic NC4 Serie Instructions De Service page 67

ALLMATIC
1. Remove travel limiter (2) with its screws (1).
2. Undo the screws of the spindle (4) and turn out spindle (6).
3. Push spindle nut (5) out of the basic body (3).
4. Thoroughly clean and oil the individual parts of the NC4.
5. On assembly, tighten the screws of the spindle (4) according to the table.
Tightening torque
When dismantling, work carefully and pay attention to small parts.
NC4
NC4 125
60 Nm
Cleaning | 10
EN
160
80 Nm
67 / 376