Workpiece Stop - Allmatic NC4 Serie Instructions De Service

8 | Clamping
8.4.3

Workpiece Stop

Fig. 18: Workpiece stop 692 168 5670 042
Fig. 19: Workpiece stop 692 128 5650 144
The workpiece stop can be mounted at the intended points with a screw. The clearance to the
stop is adjusted with the spacer (2). The same clamping position can be repeated with the
workpiece stop. The nut (1) serves as a transport lock.
Article number
692 168 5670 042
692 128 5650 144
You can find the articles in our webshop: www.allmatic.de/shop
60 / 376
Mechanical workpiece stop with spacer
Mechanical workpiece stop
ALLMATIC
NC4