After cleaning lubricate the thread and the sealing ring with polyal-
phaolefin-based silica grease, e.g. Nyogel 760G. The application of
other types of grease is unacceptable. In case of active operation and
exploitation in dusty environments, it is recommended to perform
cleaning and lubricating of the parts as often as required.
WE DO NOT RECOMMEND to leave power sources inside the flash-
light for a long storage period, as batteries (especially non-recharge-
able) can leak for various reasons and damage the inner parts of the
flashlight. If you want to keep your flashlight in a stand-by state with
batteries in, previously install new and high-quality batteries, store
the flashlight in acceptable for batteries operational temperature and
revise the batteries' state at least once a month. If you have noticed any
signs of defects, withdraw the batteries from the flashlight and dispose
of them.
Warranty and Service
Armytek provides free warranty repairs for 10 years (excluding bat-
teries, chargers, switches and connectors, which have 2-year warran-
ty) from the date of purchase if there is a document confirming the
purchase. The warranty does not extend to damage during:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified
specialists.
3. Long-term application in chlorinated and contaminated liquids or
sea water.
4. Exposure to high temperatures and chemicals (including the liquids
from defected batteries).
5. Usage of low-quality batteries.
Armytek Optoelectronics Inc.
Germany, 10551 Berlin, Jonasstraße 6
+1 (206) 785-9574, service@armytek.com
www.armytek.com
REV_00-0001
WIZARD C2 PRO USER MANUAL ENG
5