Important - eTIGER S4 Combo Secual Mode D'emploi

Connect your System
The S4 Combo Secual features a dual GSM and PSTN transmitter. This means that the control
panel of your alarm system will communicate with you either through a SIM card (GSM
module) or through your telephone landline (PSTN module).
a. Using the PSTN transmitter (telephone landline)
Connect the smaller connector of the telephone cable
(supplied with your system) to the landline interface
in the battery compartment at the back of the panel.
Connect the other end of the telephone cable to the
signal output provided by your landline carrier or to the
phone connector of your ADSL box.
b. Using the GSM transmitter (SIM card)
Open the battery compartment at the back of the control panel and insert a SIM card in the
control panel.

Important

Before using the S4 Combo Secual in GSM mode, you need to purchase a SIM card that works
on the GSM network with 850 / 900 / 1800 / 1900 MHz frequency. We recommend you to
subscribe to a plan with unlimited texts and one hour of voice. For more information, please
contact your local reseller.
Important
Make sure the SIM card does not require any PIN code. For more information, please contact
your local reseller.
Turning your System On
1. Plug the AC adaptor to an AC socket.
2. Plug the output connector of the AC adaptor into the
adaptor interface in the battery compartment at the
back of the control panel.
3. Turn the power switch to "ON" (in the battery
compartment at the back of the control panel).
5