eTIGER S4 Combo Secual Mode D'emploi page 12

Main Menu Sub Menu 1
RINGING TIMES
SYSTEM SETTINGS
SYSTEM SETTINGS SIREN SETUP
USER ID
SYSTEM SETTINGS
ARM UPLOAD
SYSTEM SETTINGS
DISARM UPLOAD
CALL RECyCLE
SYSTEM SETTINGS
BACKLIGHT TIME
SYSTEM SETTINGS
SYSTEM SETTINGS LANGUAGE
RESET
SYSTEM SETTINGS
SYSTEM SETTINGS ABOUT
-
HISTORY
Sub Menu 2 Sub Menu 3
<0-9> -
SIREN SWITCH
<ON OR OFF?>
WIRED SIREN
ARM/DISARM TONE
<ON OR OFF?>
IN SIREN VOLUME 0-1 (0=MUTE)
SIREN ALERT TIME 3 MIN
SIREN SWITCH
<ON OR OFF?>
BUILT-IN SIREN
ARM/DISARM TONE
<ON OR OFF?>
SIREN SWITCH
<ON OR OFF?>
WIRELESS SIREN
ARM/DISARM TONE
<ON OR OFF?>
(4 DIGITS):0000 -
ON / OFF -
ON / OFF -
<0-9>
030 S -
- -
- -
ABOUT JUN 4 2014
- -
Comments
This function enables you to determine the number of times the control
panel will ring before taking your call (for control by phone call).
Siren ringing time is calculated in minutes, default setting is 3
minutes. If you set the ringing time to 0, the siren will not ring out.
More information on page 14 of this manual
If "ON", you receive a notification by SMS when the system is armed.
If "ON", you receive a notification by SMS when the system is disarmed.
When the alarm is triggered, the control panel dials the numbers
you have stored. If you do not disarm the system, the control
panel will call you again (up to 9 times). The "Call Recycle" function
enables you to define the number of times the control panel
attempts to call you.
Press "Enter" to adjust the time during which the LCD screen is lit.
Change the language of the system.
All system settings will be restored to default setting.
Stored phone numbers and connected accessories will be cleared.
Choose the event log you need to track, press "Enter".
Note
Wired siren refers to a siren connected
to the control panel by wire.
Built-in siren refers to the siren featured
in the control panel.
Wireless siren refers to a siren
connected to the control panel by
radio-frequency.
This information is supplied by your CMS
center. After having stored the user ID, the
CMS center will be able to determine your
exact location according to your ID number.
This function is only available in GSM
mode (SIM card required).
Backlight time can be set from 0 to 300 s
Languages available may vary depending
on the version of your product.
The control panel keeps in record the
latest 150 event logs.
12