PRO-POINT 8866626 Consignes De Sécurité page 8

8866626
6. Check the manufacturer's maximum pressure rating for air tools
and accessories. Compressor outlet pressure must be regulated to
never exceed the maximum pressure rating of the tool (see
Specifications). Exceeding the maximum PSI rating can create a
bursting hazard, causing injury and property damage.
7. Serious injury may occur from loose debris being propelled at high
speeds from the compressed air stream. Always wear OSHA
approved safety glasses to protect the eyes during operation of the
air compressor.
8. Always turn off the air compressor and drain tank pressure
completely before attempting maintenance or attaching air tools.
Release pressure slowly from the system.
9. Serious injury or death may occur from inhaling compressed air. The air
stream may contain carbon monoxide, toxic vapors or solid particles.
Never inhale compressed air directly from the pump or air tool.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the contents are included.
Contents: • Air Compressor
IDENTIFICATION KEY
A Compressor Head (2)
B Air Intake, Dual
C Discharge Tube
D Tank Pressure Gauge - This gauge measures the pressure level of
the air stored in the tank. It is not adjustable by the operator and
does not indicate line pressure.
E Air Pressure Regulator - This air pressure regulator enables you to
adjust line pressure to the tool you are using. Turn the knob
clockwise to increase pressure and counterclockwise to decrease
pressure.
F Air Storage Tank (2)
8
4 Gallon Portable Quiet Air Compressor
For technical questions call 1-800-665-8685
V1.0