Care & Maintenance; Maintenance Schedule; Lubrication - PRO-POINT 8866626 Consignes De Sécurité

V1.0
3. Drain the condensation from the air pressure tanks at the rear of
the tanks and clear the lines of air pressure after each use.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool fittings, alignment, hoses and power supply cord
periodically. Have damaged or worn components repaired or replaced
by an authorized technician. Only use identical replacement parts
when servicing.
3. Only use accessories intended for use with this tool.
4. Keep the tool clean, dry and free from oil/grease at all times.
5. Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
6. The compressor has heat dissipation fins for proper cooling. Clean
the fins and other parts that collect dust.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.

MAINTENANCE SCHEDULE

WEEKLY
1. Turn off the power. Clean dust and foreign matter from the cylinder
head, motor, fan blades, intercooler and air pressure tanks.
2. Clean the air filter by opening it, removing the filter element and
cleaning it thoroughly. Worn or dirty filters should be replaced.
MONTHLY
Inspect unit for leaks. Tighten joints if leaks are observed.
QUARTERLY OR 300 HOURS
1. Inspect the air pressure tanks for corrosion or other damage.
2. Replace the air filter (more often if the compressor is used near
paint spraying operations or in dusty environments).

LUBRICATION

The air compressor is oil-free and does not require any lubrication.
Visit www.princessauto.com for more information
4 Gallon Portable Quiet Air Compressor 8866626
11