Nissei WSK-1011 Instructions page 11

Air is released from the cuff and
measured values are displayed as
measurement completes.
Refer to page 4 for [ ].
Refer to page 4 for [ ].
Refer to page 13 for "Err" display.
AUTOMATIC REPEATED INFLATION
If you move or strain your arm or hand, inflation may be repeated multiple
times to obtain a measurement. Repeated inflation does not indicate
malfunction of the monitor.
PULSE RATE
MEMORY SYMBOL
SYSTOLIC
DIASTOLIC
WHO CLASSIFICATION
SYMBOL
PULSE PRESSURE
4 SELECT MEMORY BANK TO SAVE THE MEASUREMENT RESULT.
MEMORY SYMBOL is displayed below MEMORY KEY.
Touching MEMORY KEY will switch
the bank.
TIME
Readings are automatically saved in the bank, either MEMORY [1] or [2],
selected when the monitor is turned off after measurement. Make sure to
confirm the bank selected after a measurement.
Refer to page 4 and page 12 for memory function.
5 TURN OFF THE MONITOR.
Touch "START/STOP" KEY.
The monitor will be turned off. Even if you do not turn off the monitor, it turns off
automatically after 3 minutes.
Do not execute repeated measurements. This will cause engorgement
of the wrist and correct values will not be obtained. Let your wrist
rest for at least 5 minutes.
-11-
1 2
MEMORY SYMBOL