Nissei WSK-1011 Instructions page 10

2 ADJUST THE MONITOR TO THE HEIGHT OF YOUR HEART.
Place a folded towel or similar
under your arm to support it so that
the cuff is kept at the height of your
heart during measurement.
Hold your elbow if you do not have an appropriate table to put your elbow on.
Measurement can be made lying on your back. Make sure that the cuff is at the
height of your heart.
If the cuff is lower (higher) than the heart, the measured reading tends to
become larger (smaller).
Take deep breaths and relax.
Do not move or speak while
taking your blood pressure.
Do not cross your legs during
measurement.
Do not hold your breath.
3 TURN ON THE MONITOR.
Touch "START/STOP" KEY.
Air is exhausted from the cuff.
Automatic inflation starts.
Inflation stops at optimal pressure and
pressure starts to decrease.
PULSE SYMBOL is displayed as pulse
is detected.
Touch
SDG!DFGSGLK
SJPREJDKLFJGS
OGJOIER;J
again to cancel measurement.
The monitor will exhaust air from
the cuff and turn off.
-10-
START/STOP
"START/STOP" KEY
DEFLATION
SYMBOL
INFLATION
SYMBOL
PULSE
SYMBOL