Precautions For Use - Chauvin Arnoux E1N Notice De Fonctionnement

English
Meaning of the symbol
CAUTION! Consult the operating manual before using the component.
In this operating manual, the instructions preceded by this symbol may cause
personal injury or damage the instrument and installations if they are not
scrupulously abided by or carried out.
You have just bought an E1N Clamp and we thank you for the interest you show for
our products.
In order to get the best use out of your instrument:
carefully read this operating manual,
follow the precautions for use.
I Do not use the clamp on conductors in which the common mode voltage in relation
to the earth is more than 600 V rms.
I Do not clamp a conductor unless it is connected to a measuring instrument.
I Keep the cable or the busbar centred in the clamp which should be perpen-dicular
to the conductor.
I Avoid proximity to other conductors which may create fields of interference.
I The clamp must be totally disconnected in the OFF position when the battery is
changed.
I In order for a measurement chain to conform to a standard, it is necessary that
each item of the chain also conforms to this standard. For your safety, ensure that
the instruments used with your clamp are also in accordance with IEC 1010 and
its conditions of application. In particular, check that the terminals of the instruments
used are protected by an earth link or by adequate insulation.
I Keep the jaw faces clean. (See Maintenance chapter).
Our guarantee is applicable for twelve months after the date on which the equipment
is made available (extract from our General Conditions of Sale, available on request).

PRECAUTIONS FOR USE

WARRANTY
13