TEFAL CLIPSO + Guide De L'utilisateur page 16

Masquer les pouces Voir aussi pour CLIPSO +:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TEFAL answers your questions
Problems
If you cannot close
the lid:
If the pressure
cooker has heated
up under pressure
with no liquid
inside:
If the pressure
indicator did not
rise and nothing
escapes from the
valve during
cooking:
If the pressure
indicator has risen
but still nothing
escapes from the
valve during
cooking:
12
Recommendations
• Check that the Opening/Closing handle is in vertical
position and the jaws are opened.
• Check that the seal is properly positioned inside the
lid, refer to the section headed "Cleaning and Main-
tenance".
Have your pressure cooker checked by a TEFAL Appro-
ved Service Centre.
This is normal for the first few minutes.
If the problem persists, check that:
- The heat source is sufficiently high; if not, increase it.
- The quantity of liquid in the pan is sufficient.
- The operating valve is on
- The pressure cooker is properly closed.
- The seal or the edge of the pan is not damaged.
- The seal is correctly positioned in the lid, (refer to
section "Cleaning and Maintenance").
This is normal for the first few minutes.
If the problem persists, put the pressure cooker under
cold running water until the pressure indicator drops
down.
Clean the operating valve
- fig. 16
lease outlet
is moving freely by pressing hard with a cotton swab
- fig. 17
on the ball
or
- fig. 15
and the steam re-
and check that the safety valve
.
.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Clipso + gourmet

Table des Matières