EWT Partn'air Manuel D'utilisation page 15

SPECIFICATIONS
Reference
EAN code
Power
Air flow
LED indicators
Number of speed
Tilting
Diamètre
Sound level
Voltage
Product dimensions
Produit weight
BEFORE USING APPLIANCE FOR THE FIRST TIME
1. Please read these instructions carefully before using
the appliance and keep them for future use.
2. Check that the voltage of your local electricity network
complies with the one which appears on the appliance.
3. Before using the appliance for the first time, remove
the appliance's protective films or stickers. Take out
the product, instruction manual and the Power cable,
ensure all parts are present.
•
The appliance is supplied with a recharging cable.
•
No assembly is required before using the appliance for
the first time. Make sure that you recharge the battery
the first time you use the appliance.
•
You can use the unit free standing without the charging
cable connected once the battery has been charged.
•
You can use the unit while connected to a live charging
port, but it should only be operated in Quiet (LED 1), Low
(LED 2) or Medium (LED 3) speed modes.
NB: Using it when connected to a charging port in High
Speed (LED 4) mode may still discharge the battery and
cause it to shut off automatically due to low power.
•
You can adjust the angle of the fan head manually in 90°
vertical motion, place one hand on the base and adjust
the head with your other hand to the desired angle, it will
stay whatever angle you adjust it to.
15
Partnair_fr_en_A5.indd 15
BUTTON AND DISPLAY LIGHT DIAGRAM
PARTN'AIR
3 046 171 904 737
5W
4.2 m/s
Yes
4
Yes, manual – 90°
18 cm
<45 dB
DC 5V
W18 x D15 x H27 cm
0.447 kg
On/Off button
When the appliance is switched off, press the control button
on the appliance (4) to switch on the ventilator.
It will automatically begin on low speed / silent mode.
The appliance has 4 speeds and each time you press the
control button (4), the ventilation speed will increase.
1. When the appliance is off, all the display LED lights are
2. When the appliance is on and the battery is fully
•
•
•
•
In order to switch the appliance off, press the control button
(4) continuously.
Charging mode
Connect the small connector of the power cable to the
power socket on the fan and connect the large connector
to a suitable (maximum) 5V charging unit (not supplied).
A typical laptop or computer USB port can be used or a
suitable plug adaptor.
Please check the output rating of the charging socket
before use.
Silent
Mode
1 2
LED Light:
ON/OFF/SPEED
off.
charged, the working indication of the LED lights are as
follows:
Silent Mode: Light 1 is on, Light 2, 3 and 4 are off
Low Speed: Light 1 and 2 are on, Light 3 and 4 are off
Medium Speed: Light 1, 2 and 3 are on, Light 4 is off
High Speed: Light 1, 2, 3 and 4 are on
FR EN
FR EN
3 4
15
14/11/19 09:13