Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.7
INTENDED USE
This machine is designed to be used in the open
air only as a lawnmower for lawns and gras-
sed area in gardens and in compliance with the
safety and operating instructions indicated in this
manual.
Any other use should be deemed "hazardous"
and shall invalidate the warranty and relieve the
Manufacturer of all liability.
HAZARD This machine is not allowed
to circulate on public roads and is not
homologated to transport persons.
2.
MACHINE ASSEMBLY
2.1
OPENING PACKAGING
The machine is shipped partially dismantled and
packaged in a metal crate to protect it during tran-
sport. The packaged machine will appear as in
fig. 1. Operations:
# remove the 6 screws and nuts con
necting the upper crate to the base (see
fig.1);
# (operation to be performed by two people) lift
the upper iron crate so as to free the machine (see
fig.2);
# free the machine from the metal fasteners secu-
ring the 4 wheels to the base (with the aid of pliers
or shears) see fig.2;
CAUTION!! To prevent damaging the
blade deck and blade, move these to
maximum height during the downward movement
of the base platform. Be very careful when perfor-
ming this delicate unpacking operation.
2.2
MACHINE PARTS
The component parts of the machine to be as-
sembled appear as in fig.3.
1) Machine body
2) Seat
3) Bag frame
4) Steering wheel
5) Bag of screws
6) Bag overturning lever
7) Steering wheel shaft extension
8) Casing
9) Fabric grass bag
10) Battery box
(model with power start only)
INSTRUCTION MANUAL
2.3 IDENTIFICATION OF MAIN MA-
(fig.4)
1) Blade deck – the casing protecting and enclo-
2) Rotating blade – the blade that mows the
3) Grass unloading pipe – the pipe connecting
4) Grass bag – besides collecting the cut grass,
5) Engine – drives the blade and wheels (see
6) Battery - (models with power start only) provi-
7) Driving seat – operator drive and control po-
8) Notice and safety labels – indicating the main
9) Steering wheel – steers the front wheels.
10) Engine compartment door – must be raised
11) Brake/clutch pedal - (of the front-wheel dri-
12) P arking brake lever.
13) I gnition key.
14) E ngine start cable.
15) E ngine throttle lever.
16) B lade deck and cutting height adjustment
17) B lade rotation engagement lever.
18) D rive and speed change engagement lever.
19) F ront steering wheels.
20) R ear driving wheels.
21) R ear cover (see fig.14).
CHINE PARTS AND CONTROLS
sing the rotating cutter blade;
grass and expels the cut grass into the grass
bag.
the blade deck to the grass bag.
this is a safety element that prevents the laun-
ching of grass and collected materials.
attached engine manufacturer's manual).
des the power to start the internal combustion
engine.
sition. A safety switch trips when the driver is
sat down.
rules for working safely (see specific chapters
in this manual).
to fill up with petrol and oil.
ve)
up/down lever.
The lever selects:
- the four forward gears;
- the neutral position (N);
- the reverse gear (R);
gb
35
Publicité
Table des Matières
