Fein FSC1.6X Mode D'emploi page 13

OBJ_BUCH-0000000139-001.book Page 13 Friday, September 20, 2013 8:05 AM
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the bow handle (figure 2).
Mount the bow handle with the 2 screws to
the bottom side of the gear case.
Mounting the depth stop (figure 3).
Mount the depth stop with the 2 screws to
the bottom side of the gear case.
Fig. 2
Fig. 3
en
13
Handle
Screws
Screws