Enter Duress Code - Siemens Codelock K44 Duo Manuel D'installation Et D'utilisation

22 K44 Duo Installation & User manual

Enter duress code

This is how to activate the alarm output when forced
to open the door under threat:
Enter the usual entrance code, only add 1 to the last
digit in the code.
Example 1: If the entrance code is 1234, enter 1235
instead.
Example 2: If the code is 1239, enter 1230 instead.
When a duress code is entered, the door will open
at the same time as the duress output is activated. It
will remain activated until reset by somebody enter-
ing programming mode.