Mounting; Requirements For Mounting - SMA GRID-CONNECT-BOX 12 Instructions D'emploi

Masquer les pouces Voir aussi pour GRID-CONNECT-BOX 12:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SMA Solar Technology AG

5 Mounting

5.1

Requirements for Mounting

Danger to life due to fire or explosion
Despite careful construction, electrical devices can cause fires.
• Do not mount the product in areas containing highly flammable materials or gases.
• Do not mount the product in potentially explosive atmospheres.
Mounting location:
☐ A solid, flat support surface must be available for mounting.
☐ The mounting location must be suitable for the weight and dimensions of the product (see Section 12 "Technical
Data", page 32).
☐ The mounting location should be freely and safely accessible at all times without the need for any auxiliary
equipment (such as scaffolding or lifting platforms). Non-fulfillment of these criteria may restrict servicing.
☐ The mounting location must not hinder access to disconnection devices.
☐ All local requirements concerning minimum passage widths and escape routes must be observed.
☐ All ambient conditions must be met (see Section 12, page 32).
☐ The mounting location must be less than 3000 m above Mean Sea Level. If you would like to use the Grid-
Connect-Box at altitudes above 3000 m, contact Service (see Section 13, page 35).
☐ The product may only be mounted in a permitted mounting position.
Permitted und prohibited mounting position:
Figure 4 : Permitted and prohibited mounting positions
Operating manual
WARNING
GRID-BOX-12-3-20-BE-xx-12
5 Mounting
13

Publicité

Table des Matières
loading

Produits Connexes pour SMA GRID-CONNECT-BOX 12

Ce manuel est également adapté pour:

Grid-box-12.3-20

Table des Matières