Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7. Attaching the Covers
A
Attach the wall plate cover and end cap
(1) Secure the wall plate cover with the two M4 x 12 mm hexagon socket head cap bolts (
If the cables are not installed inside the wall, you need to pass them through the
q
cutouts on each side of the wall plate cover. You may need to enlarge the cutouts to
allow the cables to be passed through.
(2) Place the end cap with the concave portion facing up (
End cap
B
Attach the cable cover to the projector
Attach the cable cover and tighten the two screws to secure the cable cover.
Only a specialist should remove or reinstall the projector, including for maintenance and
repairs. Refer to the User's Guide of your projector for instructions on maintenance and repairs.
Wall plate cover
Cable cover
B
).
M4 x 12 mm
hexagon socket head
cap bolts (2)
Cable cutouts
Screws (2)
26
A
).
Publicité
Table des Matières
