Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Guide
Attaching the Covers
a
Attach the wall plate covers
c
Depending on the cable configurations, you may need to cut notches (
covers to route the cables. Perform deburring on the cut sides to smooth off any sharp edges.
Make sure you do not damage the cables when routing them through the cut holes.
Also, make sure you operate the cutter safely.
b
Place the end cap with the concave portion facing up
48
) in the wall plate
- Liens rapides:
- Français
Hide quick links:
Publicité
Chapitres
Table des Matières
